Why Tent Permits, Engineering, and Proper Installation Matter
If you’re planning a backyard wedding or event with a tent in Muskoka, Barrie, Orillia, or anywhere in Simcoe County, one of the most common questions we hear is:
“Do I need a permit for a tent?”
The answer is sometimes — and it’s for good reason.
Tent permits aren’t just a municipal fee or paperwork requirement. They exist to ensure temporary event structures are installed safely and meet building code requirements designed to protect guests, property, and the surrounding community.
At Muskoka Event Services, we help clients navigate this process so their event is not only beautiful but also safe, compliant, and properly installed.
When a Tent Permit Is Required
Under the Ontario Building Code, a permit is generally required when:
• the tent or group of tents exceeds 60 m² (645 sq ft)
• the tent is attached to a building
• the tent is located within 3 meters of a building, tree, structure, or property line
If the tent is installed at least 3 meters away, a permit is often not required, depending on the municipality and the size of the tent.
Many backyard wedding tents fall close to these limits, which is why professional installers always review the site layout before installation.
Why Tents Must Be 3 Meters Away From Buildings and Trees
The 3 metre setback rule isn’t just about fire separation — it’s also about structural safety.
Most tent legs are roughly 8 feet tall. If a tent were to fail or flip due to extreme wind or improper installation, the structure could fall outward.
By requiring a 3 meter setback (about 10 feet), the building code provides a safety buffer. If a leg were to fall outward, it helps ensure there is still space between the structure and nearby buildings or trees.
This setback helps:
• reduce impact risk if a structure shifts
• prevent damage to nearby buildings
• allow emergency access around the tent
• reduce fire exposure between structures
In simple terms, the setback helps protect people, property, and neighbouring homes.
Engineer-Stamped Tent Drawings
Another important part of the permit process is engineering approval.
Large event tents used for gatherings are considered temporary structures, and municipalities often require engineer-stamped drawings confirming the tent meets structural safety standards.
These drawings are prepared by licensed engineers and typically include:
• wind load ratings
• structural design specifications
• anchoring requirements
• staking or ballast specifications
• maximum occupancy guidelines
Professional tent companies maintain these documents for their tent inventory so permits can be approved when required.
Not All Tents Qualify for Permits
One thing many homeowners don’t realize is that not every tent sold online is designed for events.
Many inexpensive tents sold through online marketplaces such as Amazon or big-box retailers are designed for light backyard shade use, not for hosting large gatherings.
Products commonly marketed as Out sunny-style party tents often do not include:
• engineer-certified structural drawings
• commercial anchoring systems
• flame-resistant fabric certification
• documentation required for building permits
Because of this, they often cannot be approved through the permit process when used for public events.
Professional event tents are engineered specifically for structural loads and are installed using commercial-grade equipment designed for event use.
Proper Maintenance Matters Too
Even engineered tents must be maintained properly.
Over time, tent equipment can degrade due to:
• UV exposure
• worn fabrics
• damaged frames
• weakened ratchets or hardware
• poor storage conditions
If equipment is not maintained properly, it may no longer meet the safety standards required for installation.
Professional rental companies regularly inspect and maintain their tent inventory to ensure it remains safe and compliant.
Why Tent Anchoring Matters
One of the most critical parts of installing an event tent is proper anchoring.
Large tents behave like a sail in the wind. Even moderate winds can create significant upward forces on the structure.
Because of this, engineered tents come with specific anchoring requirements that must be followed.
These requirements are outlined in the engineer-stamped drawings and typically specify:
• stake size and type
• minimum stake depth
• number of anchors required
• ballast requirements when staking is not possible
Following these guidelines ensures the tent can safely resist wind loads.
Ground Stakes and Soil Conditions
Most event tents are secured using large steel stakes driven deep into the ground.
Depending on the tent size and soil conditions, these stakes may be:
• 30–40 inches long or more
• driven several feet into the ground
• angled to resist upward tension forces
Professional installers also evaluate the soil conditions before installation. Sand, clay, gravel, or saturated soil can all affect how well anchors hold.
If staking is not possible — such as on pavement — engineered ballast systems may be required instead.
Professional Equipment Makes Anchoring Safer
Driving large stakes manually can be extremely demanding and unsafe.
Professional crews use specialized tools such as:
• motorized stake pounders
• Avant-mounted hydraulic stake drivers
These tools allow stakes to be installed quickly, consistently, and safely while reducing strain on installers.
They also ensure stakes reach the correct depth and angle required by engineering specifications.
Why These Regulations Exist
These rules exist because temporary structures can fail if they are not installed properly.
There have been real incidents where event tents collapsed or created dangerous situations.
In Alberta, a large event tent collapsed at a meditation retreat, resulting in a fatality and several injuries. Investigations later resulted in safety charges related to the installation.
There was also a dangerous incident in Kitchener, Ontario, where a tent installation came into contact with overhead power lines, creating a serious electrical hazard.
Events like these are rare, but they highlight why engineering standards, permits, and professional installation practices exist.
What Happens If a Tent Permit Isn’t Obtained
When a permit is required but not obtained, municipalities can issue orders to remove the structure and financial penalties.
Under the Ontario Building Code Act, building without a required permit can result in fines that can reach:
• up to $50,000 for individuals for a first offence
• up to $100,000 for corporations
In addition to fines, municipalities may require the structure to be removed or corrected immediately.
These penalties are intended to ensure that temporary structures used by the public meet proper safety standards.
Liability for Homeowners
Permits also play an important role in liability protection.
When a permit is issued, the municipality has reviewed the installation plan to ensure it meets building code requirements.
Without a permit where one is required, responsibility for the structure may fall largely on:
• the property owner hosting the event
• the tent installation company
• anyone responsible for assembling the structure
Many homeowners assume their home insurance automatically covers everything, but this is not always the case when large temporary event structures are involved.
If someone is injured and the structure was installed without required permits or proper procedures, liability could become a serious legal and insurance issue.
When homeowners attempt to install tents themselves, they may become fully responsible for the structure and any injuries that occur.
This is why professional tent companies follow proper permitting procedures and install engineered structures designed for events.
Professional Tent Installations Across Muskoka & Simcoe County
At Muskoka Event Services, we believe safety and professionalism go hand in hand.
From backyard weddings in Bracebridge and Gravenhurst to large events in Barrie, Orillia, and across Simcoe County, our goal is simple:
Make sure every tent is installed safely, properly engineered, and compliant with local regulations.
Because when you’re hosting an event with friends, family, and loved ones, the structure above them should be something you can trust.

